Care and Maintenance Guide for Reconstituted / Engineered Stone Benchtops
07 June 2021Engineered stone is a reconstituted composite that is produced with crushed stone and resin or another adhesive. Sold in slab form, it is available on the market in myriad colour selections that look similar to marble, granite or limestone. Engineered stone is frequently used for kitchen benchtops today, which are constantly subjected to food and beverage spills. Although cleaning these benchtops is not difficult, it is important to know good cleaning methods.
How to Clean and Maintain Your Engineered Stone Benchtops
Experts in the care and maintenance of reconstituted or engineered stone benchtops offer the following advice:
- Try Mild Cleaning Methods. For quartz benchtops with matte, textured or honed surfaces (non-glossy), use a mild cleanser with a creamy consistency. Dampen the benchtop with water and use a small amount of cleanser and a soft, damp cloth to gently rub the surface. Use a circular motion when rubbing, and take care to cover the entire surface. Then wipe the cleaner off with another damp cloth and dry the stone with a clean, soft cloth.
- Use a Glass and Surface Cleaner. Glass and general smooth surface cleaners will often remove stubborn stains. You can apply and clean with them in the same way that you clean with a mild cleanser. This type of cleaner is helpful for benchtop care because it does not streak the stone surfaces. When wiping the surface with a dry cloth after cleaning, use a circular polishing motion until you have dried the entire surface thoroughly.
- Try a Diluted Bleach Solution on Dark Stains. If red wine, raspberry juice or chocolate sauce is spilled on your engineered stone benchtop, try removing it with a diluted bleach solution. Mix the bleach with an equal amount of water, and apply the solution to the stain for just one minute. Quickly wash the spot with water to remove the bleach, drying it with a soft cloth. If the stain is faded, but still visible, repeat this process.
- Use a Soft Plastic Scraper for Dried Glue. If you have a glue spill on your benchtop that you discover while it is still wet, remove it with a damp cloth. If this does not work, try a white spirit cleaner, and then wash your benchtop surfaces with water. However, if the glue has already dried, use a soft plastic scraper to remove the hardened substance and wash the smooth surface with water afterwards.
Never place hot pots, pans or dishes from the stovetop or oven directly on your engineered stone benchtop. This can cause the surface to crack or discolour, and you may need to replace your stylish and practical benchtop soon after installing it. Always attempt to protect its beautiful surfaces from spills that can result in staining.
In addition, refrain from using your benchtop as a chopping board during food preparation. Although the surface is hard and strong, it can scar, chip or crack if struck with a heavy or sharp knife blade. With good care and regular cleaning, your lustrous benchtop of engineered stone will retain its beauty for many future years.
By consulting our experts at Hans International located in Sunshine North, Victoria, you can obtain excellent advice concerning the best methods of cleaning and maintaining your engineered stone benchtop. Our professional team will provide you with the latest information and techniques for keeping your stunning benchtop in the very best condition for long-term use. You and your entire household can enjoy many hours of preparing meals and snacks on its elegant, smooth surfaces.
Optimized by: Netwizard SEO
